Watching A Tv Program; Adjusting Basic Hdtv Settings - Vizio VS370E User Manual

Watching a TV Program

Before you start watching TV, please make sure that any cable, satellite, or off-air antenna connections
are secure. Also, verify that the power cord is plugged into a correctly grounded electrical outlet or surge
protector.
1. Press the power button on the remote or on the side of the HDTV. The red power light on the
HDTV will be replaced by a blue light to indicate that the HDTV is powered ON. It can take
up to 10 seconds before the picture appears.
2. There are 3 options for selecting your programming:
a. If you are using an antenna or cable connected through the ANTENNA/CABLE input, you
can select TV directly by pressing the TV button on the remote, or by pressing the
SOURCE button on the remote or the INPUT button on the side of the HDTV.
b. If you are watching broadcasts through a cable or satellite set-top box connected by an
HDMI cable, select HDMI by pressing the SOURCE button on the remote or the INPUT
button on the side of the HDTV.
c. If you are watching broadcasts through a cable or satellite set-top box connected by a
Component (YPbPr) cable, select Component 1 or 2 directly by pressing the COMP
button on the remote, the SOURCE button on the remote, or the INPUT button on the
side of the HDTV.
NOTE: You should be able to see a picture. If you do not, make sure that all of the HDTV connections are
secure and you have selected the correct video input source.
3. When using option 2a, press the CH +/- buttons on the remote or on the side of the HDTV to
change the channel.
NOTE: The Channel buttons, on the side of the HDTV and on the remote control will not work if you are
watching a program using HDMI, Component and AV inputs.

Adjusting Basic HDTV Settings

Volume
To increase the volume, press and hold the VOL+ or VOL- button on the side of the HDTV or remote
control until the desired level is reached.
TV Channels
To step up or down through the available TV channels, press the CH+ or CH- button on the side of the
HDTV or remote control once for the next or previous channel, or hold it depressed until the desired
channel is reached. Note: Channel up and down will only operate in DTV and TV modes.
Wide
Using this feature, you can watch video content in different size modes on the HDTV. Press the WIDE
button on the remote control to switch among the modes.
Fore more information see Understanding Viewing Modes on page 32.
Version 12/6/2008 23
www.VIZIO.com
VIZIO VS370E User Manual