Sleep Timer; No Signal Off; No Operation Off - Sharp Aquos LC-15S5U Operation Manual

Useful Features (Continued)
You can set the SLEEP TIMER to automatically turn off the TV.
CD CD CD
CD®®
AV MODE DISPLAY 0 0
~~~8iU
SLEEP VIEW MODE BACKLIGHT CC
1)000
The NO SIGNAL OFF function allows you to save energy.
When set to "ENABLE", the power will automatically shut
down if no signal inputs for 5 minutes.
AV MODE DISPLAY
0 __. , 0
~75'
8iU
Press MENU to exit.
I
NOTE
>
• "DISABLE" is factory preset value.
• This function can work only in TV mode.
• If interfered with by other broadcast or radio waves, "NO SIGNAL
OFF" may not work properly even when the broadcast is over.
Press MENU to display the Menu screen.
Press .Ji../Y to select "NO SIGNAL OFF", and press
ENTER.
Press
~/~
to select "OPTION".
Press MENU to display the Menu screen.
Press .Ji..l'Y to select "SLEEP TIMER", and press
ENTER.
Press
~/~
to select "OPTION".
Press
.Ji../y/~/~
to select "30MIN", "60MIN", "90MIN",
"120MIN", "150MIN" or "OFF", and press ENTER.
Press MENU to exit.
Setting the SLEEP TIMER on the Menu screen
I
NOTE >
• After you set the SLEEP TIMER, pressing POWER on the main
unit or POWER on the remote control will cancel the SLEEP
TIMER setting.
• 5 minutes before the SLEEP TIMER turns off the LCD TV set,
"5MIN REMAINING" is displayed on the screen for 4 seconds.
The SLEEP TIMER counts down and shows a similar 4-second
display for each remaining minute until the timer turns off the
LCD TV set.
When set to· "Enable", the power will automatically shut down
if there is no operation for 3 hours.
Repeat steps 1 and 2 of NO SIGNAL OFF.
Directly setting the SLEEP TIMER
Press SLEEP to display the SLEEP TIMER screen.
SLEEP TIMER [OFF]
Press SLEEP to change the setting.
[OFF]
I
[30MIN] -----.[60MIN]
1 1
[150MIN]
I
[120MIN] [90MIN]
(minutes)
[NOTE>
• The SLEEP TIMER screen automatically disappears in 3
seconds.
Press .Ji../Y to select "NO OPERATION OFF", and
press ENTER.
• 5 minutes before the power shuts down, remaining
time is displayed every minute. .
Press MENU to exit.
I
NOTE
>
• "DISABLE" is factory preset value.
@
31