Displaying Pc Screen On Tv - Panasonic TH-L32C10 Operating Instructions Manual

Displaying PC Screen on TV

The screen of the PC connected to the TV can be displayed on the TV.
You can also listen to PC sound with the audio cable connected.
To connect PC p. 40
To return to TV
PC menu setting
(changed as desired)
Menu Item
R-Gain
G-Gain
Advanced
PC B-Gain
Settings
Gamma
Reset to Defaults Press the OK button to reset to the default Picture settings
Input
Resolution
Clock
H-pos
PC
Setup
V-pos
Clock Phase
Sync
Reset to Defaults Press the OK button to reset to the default Setup settings
Other items p. 20 and p. 21.
1
Select the PC input
2
To change the settings, see the table below
Adjustments / Configurations (options)
Adjusts the white balance for red areas
Adjusts the white balance for green areas
Adjusts the white balance for blue areas
(2.0 / 2.2 / 2.5)
Switches to a wide view
VGA (640 x 480), WVGA (852 x 480 pixels),
XGA (1,024 x 768), WXGA (1,280 x 768 / 1,366 x 768 pixels)
Options change depending on signals
If "H-freq." or "V-freq." is shown in red, the signals may not be supported.
Set to the minimum level if noise occurs
Adjusts horizontal position
Adjusts vertical position
Eliminates flicker and distortion
Adjust after Clock adjustment
PC sync signal type (H & V / On Green)
H & V : Horizontal and Vertical sync from your PC
(Most common sync format)
On Green : Sync on Green sync from your PC
Corresponding signals (p. 46)
Set to the minimum level if noise occurs
29