LG 32LC2DC Owner's Manual page 7

Introduction
on
Ensure that the following accessories are included with your TV. If any accessory is missing, please contact the
dealer where you purchased the product.
User must use the shield signal interface cable (D-sub 15 pin cable) with ferrite cores to maintain the standard
compliance for the product.
/ /
/' /'
/ /
Power Cord 75_-_Round Cable Owner's Manual
,For 42PC1D**, 4 2PC3B**,50PC3D**- ............................................................................................................................................................................ For 32137142LC2D**
Remote Control /
Batteries
2-Wall brackets 2-eye-bolts
Polishing Cloth
2-TV brackets
2-Wall brackets
Twister Holder
Arrange the wires
with the twister holder.
Cable
Management
2-TV Bracket Bolts (Refer p.18)
Option Extras
-Slightly wipe stained spot on the exterior only
with the cleansing cloths for the product exterior
if there is stain or fingerprint on surface of the
exterior.
-Do not wipe roughly when removing stain.
Please be cautious of that excessive power may D-sub 15 pin Cable
cause scratch or discoloration.
Stand Installation for 32LC2D**
1 Carefully place the product screen side down on a
cushioned surface that will protect product and
screen from damage.
2 Place the hook of the stand in the back of the
product as shown.
3 Install the 4 bolts provided securely, in the back of the
product.