LG 32LC2DC Owner's Manual page 22

Installation
To avoid picture noise (interference), leave an adequate distance between the VCR and TV.
- Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sides
of the screen may remain visible on the screen.
VCR
ANTIN
( AUDI L, S'VIDEO
L_ J
Connect the AUDIO/VIDEO jacks between TV
and VCR. Match the jack colors (Video = yellow,
Audio Left = white, and Audio Right = red)
Insert a video tape into the VCR and press PLAY
on the VCR (Refer to the VCR owner's manual.)
pB L R
VIDEO LAUDIOJ
Select AV1 input source using the INPUT button
, on the remote control.
- If connected to AV IN2. select AV2 input source.
• If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the
set.
° This TV finds the connected input sources automatically forAV1, AV2 and Component 1-2. It is pre-
sumed that RGB and HDMI/DVI sources are connected.
22