11.6 Startup Menu
11.6 Startup Menu
The
Startup Menu
first menu item when you turn on the DVD Duplicator.
11.7 Auto Verify
The
setting controls auto verification of discs after a copy operation.
Auto Verify
The default setting is
11.8 Auto Compare
The
Auto Compare
target discs after a copy operation. The default setting is
11.9 Auto Prescan
The
Auto Prescan
a data/audio disc is inserted in the source drive. The default setting is
11.10 Eject Disc
The
setting controls the ejection of discs by the target drive. Three
Eject Disc
options are available:
❑
Eject Good Only
copied. This is the default setting
❑
Eject All Disc
was successful or failed.
❑
Do Not Eject
ejection is required after every copy operation.
11.11 Burn on the Fly
The
Burn on the Fly
setting is
, data is copied directly from the source DVD to the target DVD.
ON
When the setting is
on the hard disk drive, then copies the data to the target DVD.
This function is valid only on DVD Duplicators that feature an internal hard disk
drive.
18
setting enables you to select a menu item to be displayed as the
.
OFF
setting controls auto-comparison of data between source and
setting controls automatic prescan of the source disc whenever
– This option ejects the disc only if it has been successfully
– This option ejects the disc regardless of whether the copy
– With this option, the disc remains in the target drive. Manual
function enables you to control the copy operation. When the
, the DVD Duplicator first loads the data into a partition
OFF
is the default.
COPY
.
OFF
OFF
TEAC DVD Duplicator User's Manual
.