Epson 2070 - LQ B/W Dot-matrix Printer Service Manual page 109

LQ-2070 Service Manual
3.3.3 Removing the Paper Eject Assembly Cover
1. Remove the paper eject assembly cover by releasing 2 clips located along both edges of the paper
eject assembly cover, as shown in the following figure.
Figure 3-48 Removing the Gear Train Cover
When attaching the paper eject assembly cover to the CSF unit, pay attention to the position of 2
pieces of thin plastic film glued on the reverse side of the paper eject assembly cover, as shown in
the following figure.
CSF Transmission Gauge
Spring
Rev.A
Assembly Note
Gear (22mm)
Plain Washer
Figure 3-49 Engaging 5 Gears
Disassembly and Assembly
Gear Train Cover
Combination Gear ( 25 mm/11mm)
CSF Planetary Lever Assembly
White Gear ( 22mm)
3-31