Sharp PN-L602B Software Setup Manual page 38

MAC OS X
15
Display printer information.
(1) Click the machine's name.
If you are using Mac OS X v10.5 to 10.5.8 or v10.6
to 10.6.5, click the [Options & Supplies] button, click
the [Driver] tab and go to step 16.
(2) Click [Show Info].
If you are using Mac OS X v10.2.8, select [Show
Info] from the [Printers] menu.
36
16
Select the machine configuration.
If you selected [Auto Select] in (3) of step 14, the
machine configuration is detected and automatically
(2)
configured. Check the configured settings to make sure
(1)
they are correct.
(1) Select [Installable Options].
If you are using Mac OS X v10.5 to 10.5.8 or v10.6
to 10.6.5, it does not appear.
(2) Select the options that are installed on
the machine.
(3) Click the [Apply Changes] button.
If you are using Mac OS X v10.5 to 10.5.8 or v10.6
to 10.6.5, click the [OK] button.
(4) Click to close the window.
You can check the options that are installed on the
machine by printing out the "All Custom Setting List" in
the system settings. (However, note that "Input Tray
Options" must be set to the number of trays on the
machine.) Follow these steps to print out the "All
Custom Setting List": Press the [SYSTEM SETTINGS]
key, touch the [List Print (User)] key, and then touch
the [Print] key of "All Custom Setting List".
This completes the configuration of the printer
driver.