IBM 8841 - eServer xSeries 236 Option Installation Manual page 40

1. Read the safety information beginning on page v and "Installation guidelines" on
2. Turn off the server and peripheral devices, and disconnect the power cords and
3. See the documentation that comes with the adapter for any cabling instructions
4. Lift the adapter-retention latch and remove the expansion-slot cover.
5. If you are installing a full-length adapter, remove the blue adapter guide (if any)
28
IBM xSeries 236 Type 8841: Option Installation Guide
page 11.
all external cables. Remove the cover.
and information about jumper or switch settings. (It might be easier for you to
route cables before you install the adapter.)
Backup expansion-slot
screws
Adapter-
retention
latch
Expansion-
slot cover
Adapter
Adapter-
retention
clip
from the end of the adapter; then, lift the adapter-retention clip on the
adapter-support bracket. Otherwise, continue with the next step.
Adapter guide
Adapter-support
bracket