Gigabyte GV-N62128DP User Manual page 7

4. Locate the AGP slot. If necessary, remove
the metal cover from this slot; then align
your graphics card with the AGP slot, and
press it in firmly until the card is fully
seated.
5. Replace the screw to fasten the card in
place, and replace the computer cover.
6. Plug the display cable into your graphics
card; then turn on the computer and
monitor.
To VGA Monitor
To Flat Panel Display
You are now ready to proceed with the installation of the graphics card driver. For detailed
instructions, select your operating system from the list below.
After installation, please connect the power cable to your
graphics card, or the system will not boot.
To TV or VCR
- 7 - Hardware Installation