Entering Text - Panasonic Lumix DMC-SZ7 Owner's Manual

Entering Text

It is possible to enter babies' and pets' names and the names of travel destinations when
recording. (Only alphabetical characters and symbols can be entered.)
Display the entry screen.
•
You can display the entry screen via the following operations.
–
[Name] of [Baby1]/[Baby2] or [Pet] in Scene Mode
–
[Name] in [Face Recog.]
–
[Location] in [Travel Date]
–
[Title Edit]
Press 3/4/2/1 to select text and then press
[MENU/SET] to register.
•
Move the cursor to [
text between [A] (capitals), [a] (lower case), [1] (numbers) and
[&] (special characters).
•
To enter the same character again, rotate the zoom lever
towards [Z] (T) to move the cursor.
•
The following operations can be performed by moving the cursor to the item and
pressing [MENU/SET]:
–
[]]: Enter a blank
–
[Delete]: Delete a character
– [ ]: Move the entry position cursor to the left
–
[ ]: Move the entry position cursor to the right
•
A maximum of 30 characters can be entered.
names in [Face Recog.])
¢ A maximum of 15 characters can be entered for [ ], [ ], [ ], [ ] and [ ] (Maximum
of 6 characters when setting names in [Face Recog.]).
Press 3/4/2/1 to move the cursor to [Set] and then press
[MENU/SET] to end text input.
Note
•
Text can be scrolled if all of the entered text does not fit on the screen.
•
It is displayed in order of title, location, [Name] ([Baby1]/[Baby2], [Pet]), [Name] ([Face
Recog.]).
Recording
] and then press [MENU/SET] to switch
- 73 -
(Maximum of 9 characters when setting