Panasonic Lumix DMC-SZ7 Owner's Manual page 144

Dmcsz7 user guide
Hide thumbs Also See for Lumix DMC-SZ7:
Table of Contents

Advertisement

The camera becomes warm.
The surface of the camera may become warm during use. This does not affect the performance
or quality of the camera.
The lens clicks.
When the brightness changes due to zoom or camera movement, etc., the lens may click and
the picture on the screen may drastically change. However, the picture is not affected. The
sound is caused by the automatic adjustment of the aperture. This is not a malfunction.
The clock is reset.
If you do not use the camera for a long time, the clock may be reset.
> [Please set the clock] message will be displayed; please reset the clock.
When pictures are taken using the zoom, they are slightly distorted and the
areas around the subject contain colors which are not actually present.
It is possible that the subject may be warped slightly, or the borders get colored, depending on
the zoom magnification, due to the characteristics of the lens, but this is not a malfunction.
Zooming stops instantaneously.
When using the Extended Optical Zoom, the zooming action will stop temporarily. This is not a
malfunction.
Zoom does not go up to maximum magnification.
Is the camera set to Macro Zoom Mode?
Maximum zoom during Macro Zoom Mode is 3k digital zoom.
The file numbers are not recorded consecutively.
When you perform an operation after taking a certain action, the pictures may be recorded in
folders with different numbers from the ones used prior to the operation.
The file numbers are recorded with previously used numbers.
If the battery was inserted or removed without first turning the camera's power off, the folder
and file numbers for the pictures taken will not be stored in the memory. When the power is
then turned back on and pictures are taken, they may be stored under file numbers which
should have been assigned to previous pictures.
When the camera is left alone, the Slide Show is suddenly displayed.
This is the [Auto Demo] which introduces the features of the camera. Press a button to return
the camera to the original screen.
Others
(P56)
- 144 -
(P18)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents