Recording
Note
•
The optimal White Balance will differ depending on the type of fluorescent lighting being
recorded under so use [AWB], [
•
The White Balance is only calculated for subjects within the range of the camera's flash.
•
The White Balance is memorized even if the camera is turned off, but [WHITE BALANCE] for
the Advanced Scene Mode or the Scene Mode is set to [AWB] when the Advanced Scene
Mode or the Scene Mode is changed.
•
White Balance is fixed to [AWB] in following conditions.
–
In Intelligent Auto Mode
–
In [OUTDOOR PORTRAIT] and [INDOOR PORTRAIT] in [PORTRAIT]
–
In [SCENERY]
–
In [FOOD] in [CLOSE-UP]
–
In [NIGHT PORTRAIT], [NIGHT SCENERY], [SUNSET] or [PARTY] in Scene Mode
–
My Color Mode
•
When [DIRECT FOCUS AREA] (P83) is set to [ON], the operations on the cursor buttons
translate to movements of the AF area. Set using the Quick Menu (P56).
∫ Setting the White Balance manually
Set the White Balance value. Use to match the condition when taking photographs.
1
Select the white set icon (such as [
The white set selecting screen can also be displayed by pressing the cursor button toward 3.
•
2
Select [
], [
1
•
The White Balance setting screen can also be displayed by pressing the cursor button
toward 3.
3
Aim the camera at a sheet of white paper etc. so
that the frame in the center is filled by the white
object only and then touch [SET].
Note
•
White Balance may not be set when the subject is too bright or too dark. Set the White Balance
again after adjusting to appropriate brightness.
∫ Setting the color temperature
You can set the color temperature manually for taking natural pictures in different lighting
conditions. The color of light is measured as a number in degrees Kelvin. As the color
temperature increases, the picture becomes more bluish. As the color temperature
decreases, the picture becomes more reddish.
1
Select [
] and then touch [WB K SET].
•
The color temperature setting screen can also be
displayed by pressing the cursor button toward 3.
2
Touch the color temperature setting bar.
It is also possible to set the values by touching [ 3 ]/[ 4 ]
•
or pressing 3 / 4 of the cursor button.
•
You can set a color temperature from [2500K] to
[10000K].
3
Touch [SET].
88
VQT3A36
], [
1
2
], [
] or [
] and then touch [WHITE SET].
2
3
4
], [
] or [
].
3
4
]), and then touch [SELECT WHITE SET].
1