Panasonic Lumix DMC-GH2H Operating Instructions Manual page 60

Basic
o [AUTO REVIEW]
•
If it is set to [HOLD] when the camera is set to [
screen display (P40) or enlargement by rotating the rear dial is possible during Auto Review.
•
Regardless of the Auto Review setting, pictures will automatically be reviewed when taking
burst pictures with [SH] or [H] set (P76), and recording with Auto Bracket (P78) or with
[ASPECT BRACKET] (P124). (Will not hold) Under these conditions, [AUTO REVIEW] is
disabled.
•
If [HIGHLIGHT] (P129) is set to [ON], white saturated areas appear blinking in black and white
when the Auto Review function is activated.
•
When [AUTO REGISTRATION] in [FACE RECOG.] (P108) is set to [ON], [AUTO REVIEW] can
only be set to [3SEC.] or [5SEC.].
x [USB MODE]
• When [PC] is selected, the camera is connected via the "USB Mass Storage" communication
system.
•
When [PictBridge(PTP)] is selected, the camera is connected via the "PTP (Picture Transfer
Protocol)" communication system.
[TV ASPECT]
•
This will work when the AV cable is connected.
[HDMI MODE]
60
VQT3A36
Set the length of time that the picture is displayed after taking it.
[OFF]/[1SEC.]/[3SEC.]/[5SEC.]
[HOLD]:
The pictures are displayed until shutter button is pressed halfway.
Select the USB communication system after or before connecting
the camera to your PC or your printer with the USB connection
cable (supplied).
y [SELECT ON CONNECTION]:
Select either [PC] or [PictBridge(PTP)] if you connected the
camera to a PC or a printer supporting PictBridge.
{ [PictBridge(PTP)]:
Set after or before connecting to a printer supporting PictBridge.
z [PC]:
Set after or before connecting to a PC.
Set to match the type of TV.
[W]: When connecting to a 16:9 screen TV.
[X]: When connecting to a 4:3 screen TV.
Set the format for the HDMI output when playing back on the
HDMI compatible high-definition TV connected with this unit using
the HDMI mini cable (optional).
[AUTO]:
The output resolution is automatically set based on the
information from the connected TV.
[1080i]:
The interlace method with 1080 available scan lines is used for output.
[720p]:
The progressive method with 720 available scan lines is used for output.
[480p]:
The progressive method with 480 available scan lines is used for output.
] (P35) or [ ] (P80), switching of the playback