JVC GY-HD250U - 3-ccd Prohd Camcorder Using page 5
Br-hd50u hdmi capture workflow using blackmagic's intensity card
Hide thumbs
Also See for GY-HD250U - 3-ccd Prohd Camcorder:
- Instructions manual (117 pages) ,
- Reference manual (66 pages) ,
- Instrucciones (58 pages)
Advertisement
Intensity and MAC based HD Workflow
Requirements:
NLE software: Final Cut Pro5.1.2
NLE hardware: Mac Pro with PCIe bus is required
BR-HD50U firmware: Ver. 1.08 or later
VTR control is not possible; on the fly capture only
Intensity firmware: Requires driver 1.2 or later. This driver is
available on Black Magic Design's website at the following URL:
http://www.blackmagic-design.com/support/detail.asp?techID=178
Advertisement
