Haier 42T51 User Manual page 22

Select Channels with Numeric Keys
1. Operations to select channels with 1 digit (0-9):
Press the number keys (0-9)on the remote control to select TV channel directly.
2. Operations to select channels with 2 digits (10-99):
Press the number keys with 2 digits (10-99) on the remote control to select TV
channels.
3. Operations to select channels with 3 digits (100-199):
Press the number keys with 3 digits (100-199) on the remote control to select TV
channels.
Note
With the mode of
:
HDMI2, PC all functions and adjustments are similar with TV. User can
check it at convenience.
function with external HDMI/DVI commutator.
USB signal source operation
please insert USB memory card into USB interface of TV, p ress "source" key on the
remote control or front panel to select USB signal source ( I f you don't insert the USB
memory card into USB interface of TV, operation is invalid), press "OK" key to enter.
Notice: This USB interface only support move U dish, can't connect move hard drive,
also can't connect to USB interface of computer. USB support file format with Mp3/
JPG. It isn't compatible with some of move U dishes, please replace move U dish.
Basic Operation Instruction
AV1, AV2, S-VIDEO1, S-VIDEO2, YPBPR, HDMI1,
HDMI connector can realize DVI connector
21