Basic Operation Instruction; Power On/Off; Standby; Signal Source Selection - Haier 26T32 User Manual

User manual

Hide thumbs

Table Of Contents

Table of Contents

Power On/Off

Plug power cord into the electrical socket and press ''

press ''Power'' key on the remote control to turn on the TV. If you want to close the TV,

please press ''

'' key on the front panel, and unplug the power cord. (

used to connect or disconnect AC input and it s convenient for operating the machine

Standby

Press ''Power''key on the remote control. TV will be in standby.

Special Attention:

1. TV set will automatically turn to standby if there is no signal input for 5 minutes

when TV turns on.

2. TV set will automatically turn to standby when the preset time of turning off

reaches.

3. If you do not use it for a long time ,please turn off the power supply for the

machine. Do not let the machine work in standby state for a long time.

Signal Source Selection

Press ''SOURCE'' key either on the remote control or on the front panel.

''MENU OF SIGNAL SOURCE'' will be displayed on the screen. Then

press ''Up/Down'' key on remote control or "CH+/CH-" key on the front

panel to choose the signal source such as TV, AV1, AV2, SVIDEO1,

SVIDEO2, YPbPr, VGA, HDMI. Press ''OK'' key on the remote control or

"MENU" key on the front panel and TV will switch the current signal

source to the signal source you choose(Fig.1).

Menu Operation Instruction

Press ''MENU'' key on the remote control or on

the front panel, The TV will display the main menu

(Fig.2).

1. Press ''Left/Right'' key on the remote control

or ''VOL+/VOL-'' key on the front panel to select

the adjustment sort menu, which includes 5

sorts:

PICTURE, SOUND, FUNCTION, TV, PC.

2. Press ''Up/Down'' key on the remote control or

''CH+/CH-'' on the front panel to enter the adjustment sort menu.

3. Press ''Up/Down'' key on the remote control or ''CH+/CH-'' on the front panel to

select what is needed to adjust in sort menu.