HP 6400/8400 User Manual page 96

Table 21 Error Messages (continued)
Status Code Value
25
Objects in your system are in use,
and their state prevents the
operation you wish to perform.
96 Error messages
Meaning
Several states can cause this message:
Case 1: The operation cannot be performed
because an association exists a related
object, or the object is in a progress state.
Derived unit create: Case 2: The supplied
virtual disk handle is already an attribute of
another derived unit. This may indicate a
programming error
Derived unit discard: Case 3: One or more
LUNs are presented to EVA hosts that are
based on this virtual disk.
Case 4: Logical disk clear data lost: The
virtual disk is in the non-mirrored delay
window.
Case 5: LDAD discard: The operation cannot
be performed because one or more virtual
disks still exist, the disk group still may be
recovering its capacity, or this is the last disk
group that exists.
Case 6: LDAD resolve condition: The disk
group contains a disk volume that is in a
data-lost state. This condition cannot be
resolved.
Case 7: Physical Store erase volume: The
disk is a part of a disk group and cannot be
erased.
Case 8: Storage cell discard: The storage
cell contains one or more virtual disks or
LUN presentations.
Case 9: Storage cell client discard: = The
EVA host contains one or more LUN
presentations.
Case 10: SCVD discard: The virtual disk
contains one or more derived units and
cannot be discarded. This may indicate a
programming error.
Case 1 1: SCVD set capacity: The capacity
cannot be modified because the virtual disk Case 15: Remove the virtual disks from
has a dependency on either a snapshot or
snapclone.
Case 12: SCVD set disk cache policy: The
virtual disk cache policy cannot be modified
while the virtual disk is presented and
enabled.
Case 13: SCVD set logical disk: The logical
disk attribute is already set, or the supplied
logical disk is already a member of another
virtual disk.
Case 14: VOLUME set requested usage: The
disk volume is already a member of a disk
group or is in the state of being removed
from a disk group.
Case 15: GROUP discard: The Continuous
Access group cannot be discarded as one
or more virtual disk members exist.
How to Correct
Case 1: Either delete the associated
object or resolve the in progress state.
Case 2: . Report the error to product
support.
Case 3: Unpresent the LUNs before
deleting this virtual disk.
Case 4: Resolve the delay before
performing the operation.
Case 5: Delete any remaining virtual
disks or wait for the used capacity to
reach zero before the disk group can
be deleted. If this is the last remaining
disk group, uninitialize the storage cell
to remove it.
Case 6: Report the error to product
support.
Case 7: The disk must be in a reserved
state before it can be erased.
Case 8: Delete the virtual disks or LUN
presentations before uninitializing the
storage cell.
Case 9: Delete the LUN presentations
before deleting the EVA host.
Case 10: Report the error to product
support.
Case 1 1: Resolve the situation before
attempting the operation again.
Case 12: Resolve the situation before
attempting the operation again.
Case 13: This may indicate a
programming error. Report the error
to product support.
Case 14: Select another disk or
remove the disk from the disk group
before making it a member of a
different disk group.
the group and retry the operation.