HP 6400/8400 User Manual page 100

Table 21 Error Messages (continued)
Status Code Value
64
Connection is suspended
65
Bad image header
66
Bad image
67 The firmware image file is too
large.
Image too large
70
Image incompatible with system
configuration. Version conflict in
upgrade or downgrade not
allowed.
71
Bad image segment
72
Image already loaded
73
Image Write Error
74
Logical Disk Sharing
75
Bad Image Size
76
The controller is temporarily busy
and it cannot process the request.
Retry the request later.
77
Volume Failure Predicted
100 Error messages
Meaning
The operation cannot be performed because
the Continuous Access connection is
currently suspended
The firmware image file has a header
checksum error.
The firmware image file has a checksum
error.
Invalid status for logical disk. This error is
no longer supported.
The firmware image file is incompatible with
the current firmware.
The firmware image download process has
failed because of a corrupted image
segment.
The firmware version already exists on the
device.
The firmware image download process has
failed because of a failed write operation.
Case 1: The operation cannot be performed
because the virtual disk or snapshot is part
of a snapshot group.
Case 2: The operation may be prevented
because a snapclone or snapshot operation
is in progress. If a snapclone operation is in operation. Otherwise, the operation
progress, the parent virtual disk should be
discarded automatically after the operation
completes. If the parent virtual disk has
snapshots, then you must delete the
snapshots before the parent virtual disk can
be deleted.
Case 3: The operation cannot be performed
because either the previous snapclone
operation is still in progress, or the virtual
disk is already part of a snapshot group.
Case 4: A capacity change is not allowed
on a virtual disk or snapshot that is a part
of a snapshot group.
Case 5: The operation cannot be performed
because the virtual disk or snapshot is a part
of a snapshot group.
The firmware image file is not the correct
size.
The controller is currently processing a
firmware download. Retry the request once
the firmware download process is complete.
The disk volume specified is in a predictive
failed state.
How to Correct
Resolve the suspended mode and retry
the request.
Retrieve a valid firmware image file
and retry the request.
Retrieve a valid firmware image file
and retry the request.
Retrieve a valid firmware image file
and retry the request.
Retrieve a valid firmware image file
and retry the request
Verify that the firmware image is not
corrupted and retry the firmware
download process.
No action required.
Verify that the firmware image is not
corrupted and retry the firmware
download process.
Case 1: No action required.
Case 2: No action required.
Case 3: If a snapclone operation is in
progress, wait until the snapclone
operation has completed and retry the
cannot be performed on this virtual
disk.
Case 4: No action required.
Case 5: No action required.
Retrieve a valid firmware image file
and retry the request.
Retry the request once the firmware
download process is complete.
Report the error to product support.