Table of Contents
Advertisement
PAINTING THE SPEAKER FRAME AND GRILL
The speaker frame and grill can be painted to match your room décor. Use high quality spray paint and select a
well ventilated area before proceeding.
Painting the frame
1 Remove the speaker from the wall if it is already
installed. Also, remove the grill from the baffle.
2 Mask the speaker components and the baffle with
the supplied paint protective cover.
3 Apply the paint to the frame.
Paint protective
cover
ADJUSTING THE HIGH LEVEL VOLUME CONTROL
If you wish to adjust the tonal balance to suit your
taste or your listening environment, use the High Level
control on the front panel to change the high
frequency volume level. Turn the control clockwise to
boost and counterclockwise to cut over a range of -6
dB to +3 dB.
Speaker
Frequency Range
High level Frequency Control
Impedance
Nominal Input
Maximum Input
Sensitivity (dB/2.83v. 1m)
Crossover Frequency
Dimension (H x W x D)
(Mounting depth)
Weight
Magnetic Shielding
*Specifications subject to change without notice due to product improvements.
Painting the grill
1 Carefully remove the grill from the speaker, if
attached.
2 Apply the paint to the grill. Make sure that the grill
holes remain free of paint. Clogging the holes with
paint may diminish the sound quality.
Speaker Grill
SPECIFICATIONS
6-1/2" Kevlar cone woofer
1-5/8" Aluminum dome mid range
1" Titanium dome tweeter
50Hz to 28KHz
+3dB to -6dB
8 ohms
50 W
150 W
88 dB
3,500Hz and 7,000Hz
11-15/16" x 8-29/32" x 3-13/16" (303.6 x 226.4 x 96.45 mm)
3-1/16" (77.7mm)
4.7 lbs (2.1 kg)
No
7
Advertisement
Table of Contents
