Selecting A Speaker - Yamaha YVC-1000MS User Manual

Selecting a speaker

Select whether to output the incoming sound through only the built-in speaker, only external speakers, or both the
built-in speaker and external speakers.
1
Hold down the volume + and - buttons (
same time.
The volume + and - buttons (
The selected speaker is shown on the level indicator, and the voice guidance prompts you to determine the
speaker.
Indicator pattern (
2
Press the volume + (
speaker.
If the speaker is changed, the voice guidance notifies the user of information about the new speaker.
If the volume + ( ) button or volume - (
the normal mode.
Operation
Press the volume + button (
Press the volume - button (
Both the built-in speaker and external speakers cannot be disabled.
Volume + and - buttons
The table below shows indicator patterns viewed from this side.
) flash green.
: ON, : OFF)
The sound is output only from the built-in speakers.
The sound is output from both the built-in speakers and external speakers.
The sound is output only from external speakers.
) button or volume - (
) button is not pressed for 6 seconds or more, the product returns to
). Switches whether to enable or disable the output of external speakers.
). Switches whether to enable or disable the output of the built-in speaker.
Level indicator
) for 2 seconds or more at the
Speaker output
) button to change the required
Changed contents
YVC-1000MS User's Manual
31