HP StorageWorks S1000 - NAS Administration Manual page 161

Table 5: PSM Error Codes
0xC0000005
0xC0000008
0xC000000D
0xC000000E
0xC0000010
0xC0000013
0xC000001C
0xC0000022
0xC0000022
0xC0000023
0xC0000034
0xC000003A
0xC000003B
0xC000003E
0xC0000043
0xC000009A
0xC00000B5
0xC00000BA
0xC00000E8
NAS 1000s Administration Guide
Error Code
An Access Exception occurred.
Action: Save the system eventlog and contact your vendor's technical
support.
User performing PSM function without opening PSM.
Action: Save the system eventlog and contact technical support.
An invalid parameter was passed to a function.
Action: Save the system eventlog and contact technical support.
Device name is not recognized by PSM.
Action: Save the system eventlog and contact technical support.
An invalid IOCTL was sent to the driver.
Action: Save the system eventlog and contact technical support.
Access to a virtual volume has been attempted after it has been destroyed.
Action: Do not access virtual volumes after they have been destroyed.
An invalid IOCTL was sent to the driver.
Action: Save the system eventlog and contact technical support.
An access exception occurred.
Action: Save the system eventlog and contact technical support.
You do not have sufficient rights to the cache file directory.
Action: Save the system eventlog and contact technical support.
Specified buffer size is too small.
Action: Save the system eventlog and contact technical support.
Cache file name is invalid.
Action: Save the system eventlog and contact technical support.
An invalid path was given for the cache file.
Action: Save the system eventlog and contact technical support.
An invalid path was given for the cache file.
Action: Save the system eventlog and contact technical support.
Bad sector was detected in the cache file.
Action: Save the system eventlog and contact technical support.
A file cannot be opened because the share access flags are incompatible.
Action: This occurs when the very last snapshot is deleted. PSM initializes its
files when the last snapshot is deleted. While it is initializing, a new
snapshots can not be created. Try again in a few minutes.
There is insufficient memory available.
Action: Save the system eventlog and contact technical support.
I/O timed out while reading from the cache file.
Action: Save the system eventlog and contact technical support.
The cache location must be a file rather than a directory.
Action: Save the system eventlog and contact technical support.
Invalid buffer address passed for I/O.
Action: Save the system eventlog and contact technical support.
Description
PSM Error Codes
161