Setting The X-Scale And Y-Scale; Setting The Sewing Speed - Brother BAS-326G PS Instruction Manual

5-4. Setting the X-scale and Y-scale

5-5. Setting the sewing speed

5. USING THE OPERATION PANEL (BASIC OPERATIONS)
The scales are set to 100 (%) at the time of shipment from
the factory.
1. Press the SELECT key (1) so that the X-SCALE
indicator (2) (for X-scale setting) or the Y-SCALE
indicator (3) (for Y-scale setting) is illuminated.
• The setting value (%) will appear in the menu display
(4).
* When memory switch no. 402 is set to "ON", the
settings will be displayed in units of mm.
2. Press the
• The program number will flash in the PROGRAM No.
display (6).
3. Depress the work clamp switch (7) to lower the work
clamp, and then depress the start switch (8).
• The work clamp will move to the sewing start position,
and then the scales will be applied.
• The program number will stop flashing and illuminate
steadily.
NOTE:
After completing the setting, be sure to refer to "5-6.
Checking the sewing pattern" to check that the needle
drop position is correct.
2157B
The sewing speed is set to 2000 (sti/min) at the time of
shipment from the factory.
1. Press the SELECT key (1) until the SPEED indicator (2)
illuminates.
• The setting value (sti/min) will appear in the menu
display (3).
2. Press the
(Sewing speed setting: 400 − 2700)
4956Q
BAS-326G PS
key (5) to set the scale (0 − 400).
or
or key (4) to set the sewing speed.
28