Option Menu - Dukane 8935 User Manual

Multifunctional Settings (continued)
Multifunctional Settings (continued)

OPTION Menu

With the OPTION menu, the items shown in the table below can be
performed. Perform each operation in accordance with the
instructions in the table below.
Item
Adjust the volume using the
VOLUME
Select the TURN ON or the TURN OFF using the
SPEAKER
When the TURN ON is selected, the built-in speaker works.
Select a remote sensor using the
it using the ENTER button (2). :
IR REMOTE
memo
Always at least one sensor is on.
Select a number as an ID number for remote control using the
The projector is controlled by the remote control whose ID CHANGE switch is
IR REMOTE ID
set into the position of the same number as this number. When the ALL is
selected, the projector is controlled by a remote control irrespective of the
position of the ID CHANGE switch.
memo
Pressing the RESET button for about 3 seconds displays the LAMP TIME menu.
Select the RESET using
Selecting the RESET resets the count of the lamp timer to 0.
LAMP TIME
memo
timer counts the used time of the current lamp, to display the messages about
the lamp. Incorrect performing causes incorrect operation of the messages.
memo
Pressing the RESET button for about 3 seconds displays the FILTER TIME
menu.
Select the RESET using
Selecting the RESET resets the count of the lamp timer to 0.
FILTER TIME
memo
filter. The filter timer counts the used time of the air filter after cleaning or
replacement, to display the messages about the air filter. Incorrect performing
causes incorrect operation of the messages.
memo
High Low
TURN ON TURN OFF
(1) FRONT TOP
A sensor cannot be turned off when the other two are off.
ALL 1 2 3
Please refer to the section "Using The Remote ID Feature".
RESET CANCEL
Perform this function only when you have replaced the lamp. The lamp
About replacing the lamp, please refer to the section" Lamp".
RESET CANCEL
Perform this function only when you have cleaned or replaced the air
About caring for the air filter, please refer to the section "Air Filter".
Description
/ buttons. :
/ button (1), then switch
REAR (2) (Off)
button to reset the timer. :
button to reset the timer. :
(This table is continued to the following page.)
MENU
MAIN
VOLUME
PICTURE-1 SPEAKER
PICTURE-2
IR REMOTE
INPUT
IR REMOTE ID
AUTO LAMP TIME
SCREEN
FILTER TIME
OPTION SERVICE
RESET
NETWORK
: SELECT
/ buttons. :
IR REMOTE
FRONT
(On)
TOP
REAR
ENT
/ buttons. :
16
TURN ON
ALL
1234 h
4321 h
OPTION
33