Selecting A Source; Selecting The Computer Or Video Source - Dukane 8774 User Manual

Selecting a Source

Selecting the computer or video source

Using the Remote Control
Press any one of the COMPUTER 1/2/3, Component, VIDEO, S-VIDEO, VIEWER
or LAN buttons.
Selecting from Source List
Press and quickly release the SOURCE button on the projector cabinet to display
the Source list. Each time the SOURCE button is pressed, the input source will
change as follows: "Computer 1/2/3", "Component", "Video" (VCR or laser disc
player), "S-Video", "Viewer" (slides on a PC card) or "LAN" (LAN port [RJ-45] or
wireless LAN card).
To display the selected source, press the ENTER button.
Detecting the Signal Automatically
Press and hold the SOURCE button for a minimum of 1 second, the projector will
search for the next available input source. Each time you press and hold the
SOURCE button for a minimum of 1 second, the input source will change as
follows:
Computer1 → Computer2 → Computer3 → Componet → Video → S-Video →
Viewer → Computer1 → ...
If no input signal is present, the input will be skipped. When the input source you
wish to project is displayed, release the button.
3. Projecting an Image (Basic Operation)
26
POWER POWER
OFF ON
COMPUTER
1
2
VIDEO VIEWER
COMPONENT
3
S-VIDEO LAN
SELECT
PC CARD
LAMP
STATUS
POWER
3D REFORM AUTO ADJUST SOURCE ON/STAND BY
PC CARD
LAMP
STATUS
POWER
3D REFORM AUTO ADJUST SOURCE ON/STAND BY