Repair Parts - A.O. Smith Residential Power Vent Gas Water Heaters with Hot Surface Ignition Instruction Manual

Repair Parts (cont'd)
KEY PART
NO. DESCRIPTION
1. Vent Cap w/Screen (PVC)
2. Wall Collar
3. PVC, ABS or CPVC Schedule 40
Vent Pipe (supplied locally)
4. 90° PVC, ABS or CPVC Schedule 40
Elbow (supplied locally)
5. Vent/Blower Adapter
6. Blower
7. Blower Gasket
8. Venting Manual Reset Switch
9. Draft Hood Assembly
10. Dip Tube
11. Anode Rod
12. Temperature-Pressure Relief Valve
13. Drain Valve
14. Drain Valve Washer
" x
( 17 /
32
15. Inner Door
16. Hot Surface Ignition Assembly
17. Burner Assembly (Natural)
17. Burner Assembly (L.P.)
18. Orifice (Natural)
18. Orifice (L.P.)
Now that you have purchased this Water Heater, should a need ever exist for repair parts or service, simply contact the com-
pany it was purchased from or the manufacturer listed on the model rating plate on the water heater.
Be sure to provide all pertinent facts when you call or visit.
Selling prices will be furnished on request or parts will be shipped at prevailing price and you will be billed accordingly.
The model number of your Gas Water Heater will be found on the model rating plate located above the gas control valve.
WHEN ORDERING REPAIR PARTS, ALWAYS GIVE THE FOLLOWING INFORMATION:
MODEL NUMBER
SERIAL NUMBER
THIS IS A REPAIR PARTS LIST, NOT A PACKING LIST.
" x " thick)
13 / 1 /
64 8
(TYPE GAS) NATURAL OR PROPANE (L.P.)
PART DESCRIPTION
KEY PART
NO. DESCRIPTION
19. Manifold (Natural)
19. Manifold (L.P.)
20. Gas Thermostat (Natural)
20. Gas Thermostat (L.P.)
21. Wiring Harness
22. Manifold Cover
23. Control Cover
24. On/Off Switch
25. Pressure Switch
26. Power Cord
27. Flue Baffle
28. Restrictor Ring
29. Drain Pan
30. Water Heater Stand
39