Toshiba TLP-X150 Owner's Manual page 20

Using the menus (Continued)
Detailed description
[Screen size]
• Normal : Enlarges an input image to fit the screen without changing the aspect
ratio of video signals.
• Full : Displays an input image in 104 × 768 dot resolution by enlarging it to
fill the entire screen.
• Thru : Displays an input image in the native resolution of the video signals.
Thru display is not available for Y/P
images.
The larger image than the screen size will be displayed over the
screen. The input image may appear vertically long with some
frequencies of video signals.
• Wide : Displays an input image in the center of the screen with a 16:9 aspect
ratio by enlarging it to fit the width of the screen. The upper and lower
portions of the image will be compressed.
Wide display is not available for Computer-input images.
• For Y/P /P input, screen size setting function is not available for the video signals
B R
with a 16:9 aspect ratio.
• For the USB memory-input images, the size cannot be set.
Note
• Using the screen size setting function on commercial video software, broadcast or
cable-broadcasting programs to display images with the varying aspect ratio except
for the purpose of your private viewing and listening may infringe the copyright
protected by the copyright laws.
[Up/down shift]
Shifts the projected image vertically when [Screen size] is set to [Wide].
[Blackboard mode]
Projects the image in colors similar to projecting on a screen.
Precaution
• The projected image may differ depending on the type, color, and material of the
blackboard and wall even if the selected color is the same as the projected screens.
[Background]
• TOSHIBA is set for [Logo] by factory setting.
• If user's logo has been registered, it is displayed when [Logo] is set for background.
[Start-up screen]
If user's logo has been registered and this setting is [On], the logo is displayed at start-up.
[User logo]
Part of the image that is input from a computer is registered as a stationary picture and
is displayed as a logo at start-up and when no signal is input.
/P , Video and S-Video-input
B R
8
<Logo registration>
How to register user logo
1 Project a picture to register.
2 Select [User logo] in the Display setting menu, and press the
button.
3 Select <Logo registration> from the displayed menu list and press
the button.
4 The registration area is displayed for confirmation. Select [OK]
and press the button.
• If the registered picture does not fall within the display area, use the
computer to scroll the screen.
5 Select [Yes] to register and press the
6
Registration starts.
• A message is displayed while registration is in process.
Notes
• You can register a logo when the input is set to Computer and USB memory.
• For the USB memory-input, a logo cannot be registered when a thumbnail list is
displayed.
• The area that can be registered is 51 × 84 dots at the center of the screen. To register
a company logo, arrange the image within that space.
• Only one logo can be registered. When a new image is registered, the old one is
deleted.
• The time needed to register or display the image varies depending on the data size.
• Using this function on commercial video software, broadcast or cable-broadcasting
except for the purpose of your private viewing and listening may infringe the
copyright protected by the copyright laws.
<Display style>
Select the size of the registered logo.
: Displays the registered image in the original size at center of the screen.
: Displays the registered image by enlarging it fully within the screen.
(As processed digitally, the image quality is degraded.)
<Background>
Sets background color when [Center] is selected for the logo [Display style].
<Logo confirmation>
You can preview the registered logo.
<Reset logo>
You can reset the registered logo, display style and background to the factory
setting. (The logo set for the start-up screen and background is reset.)
9
or
button.