Electrolux EW30IF60IS Specifications page 2

Induction Freestanding Range
EW30IF60I S
13"
max.
25"
24"
*Note: 30" minimum clearance between top of cooking
surface and bottom of unprotected wood or metal
overhead cabinet; or 24"minimum clearance when
bottom of wood or metal overhead cabinet is protected
by not less than 1/4" flame-retardant millboard covered
with not less than No. 28 MSG sheet steel, 0.015"
stainless steel, 0.024" aluminum or 0.020" copper.
0" clearance is minimum for rear of range. Follow all
dimension requirements provided above to prevent
property damage, potential fire hazard, and incorrect
countertop and cabinet cuts.
30" Induction Freestanding Range Specifications
Product Weight – 240 Lbs.
•
Single phase 3- or 4-wire cable, 120 / 240 or 120 / 208 Volt, 60 Hertz,
•
fused on both sides of line with ground.
Connected Load (kW Rating) @ 240 / 208 Volts = 15.5 / 11.5 kW
•
Recommended Circuit Breaker – 40 Amps
•
Always consult local and national electric codes.
•
Floor beneath range MUST be solid and level.
•
Overhead cabinetry should not exceed a 13" maximum depth.
•
Absolute minimum horizontal distance between overhead cabinets
•
installed to either side of appliance must be no less than maximum
width of appliance.
Range can be installed flush to wall with 0" minimum rear clearance.
•
Minimum 1" clearance required from edge of rangetop to nearest
•
combustible wall on either side of range above 36" height.
Electrolux Major Appliances, N.A.
10200 David Taylor Drive Charlotte, NC 28262
USA
• •
CANADA 5855 Terry Fox Way Mississauga, ON L5V 3E4
• •
EW30IF60I 09/10
30"min.
30"
min. *
min.
C L
18"
30"
min.
11"
22"
2 5 / "
8
6"
Shaded area allows for flush-to-wall
installation of rear wall electrical
outlet. (All dimensions for outlet
location are maximum.)
1-877 -4electrolux (1-877 -435-3287)
•
1-800-265-8352
•
Minimum
1"clearance
required
to nearest
combustible
wall on
either side
of range
above 36"
18"
height
Wall
36"
stand.
Front
30"
48 1 / "
2
max.
29
Allow 30" minimum clearance between top of cooking surface and
•
bottom of unprotected wood or metal overhead cabinet; or 24" minimum
clearance when bottom of wood or metal overhead cabinet is protected
by not less than 1/4" flame retardant millboard covered with not less than
No. 28 MSG sheet steel, 0.015" stainless steel, 0.024" aluminum or
0.020" copper.
To reduce risk of fire when using overhead cabinetry, install range hood
•
that projects horizontally a recommended minimum of 5" beyond bottom
of cabinets.
Follow all dimension requirements provided to prevent property damage,
•
potential fire hazard, and incorrect countertop and cabinet cuts.
Note: For planning purposes only. Refer to Product Installation Guide
on the web at electroluxappliances.com for detailed instructions.
electroluxappliances.com
•
electroluxappliances.ca
•
© 2010 Electrolux Home Products, Inc.
Side
29 1 / "
4
26 1 / "
4
25 3 / "
4
48 3 / "
8
Power cord location
(middle bottom rear*)
*when viewed from front
36"
(Adjustable)
7 / "
8
High standards of quality at Electrolux Home Products, Inc. mean
we are constantly working to improve our products. We reserve the right
to change specifications or discontinue models without notice.
Printed in the U.S.A.