Lens Control; Zoom/Focus; Function Button; Button1/2/3 - Panasonic PTAE2000 Operating Instructions Manual

LENS CONTROL

Remote control
See "Navigating through the MENU" on page 30.
See "Main menu and sub-menu" on page 28.

ZOOM/FOCUS

You can use the 2 different test patterns to adjust the
focus and zoom of the image. See "Lens shift and
positioning" on page 16.
1. Press ENTER to display test pattern 1.
Press F G to adjust the focus and I H to adjust
the zoom.
2. Press ENTER to display test pattern 2.
Press F G to adjust the focus and I H to adjust
the zoom.
3. Press ENTER to display the projected image.
You can confirm the adjustment is fit to the projected
image.
4. Press MENU or RETURN to return to the previous
menu, or press repeatedly to escape the menu
mode.
NOTE:
• When the projector and/or the screen is tilted, adjust
the focus at the center of the image. The upper and
lower edge might be out of focus.
• When the image is distorted in keystone, adjust the
KEYSTONE in POSITION menu.
Control panel
RETURN FOCUS
ZOOM
ENTER
RETURN FOCUS
ZOOM
ENTER

FUNCTION BUTTON

Remote control
See "Navigating through the MENU" on page 30.
See "Main menu and sub-menu" on page 28.

BUTTON1/2/3

You can assign certain menu options to the 3 function
buttons for instant operation.
1. Select the required button from BUTTON1,
BUTTON2 or BUTTON3 and press the ENTER
button.
2. Press F G I H to select the required menu
options and press the ENTER button.
HDMI 1 IN
HDMI 2 IN
HDMI 3 IN
COMPUTER IN
COMPONENT 1 IN
COMPONENT 2 IN
S-VIDEO IN
VIDEO IN
BLANK
AUTO SETUP
CONTRAST
CONTRAST R
CONTRAST G
CONTRAST B
BLANK function
You can stop the projection temporary for electrical
power save. Press any button except the LIGHT
and learning remote control buttons.
Control panel
NORMAL
DYNAMIC
COLOR1
COLOR2
CINEMA1
CINEMA2
CINEMA3
SPLIT ADJUST
WAVEFORM AUTO
ADJUST
MEMORY LOAD
BRIGHTNESS
BRIGHTNESS R
BRIGHTNESS G
BRIGHTNESS B
E
NGLISH - 39