Projector Control Window; Detailed Set Up Window - Panasonic PT-LB1 Operating Instructions Manual

Using WebBrowser

Projector control window

You can make various projector settings.
If you migrate from other page, click [Projector control] in the main menu (at the left of the window).
Basic control window
„
On this window, click the [Basic control] tab.
Connection with the projector may not be possible immediately after the power is turned on. In this case wait a bit and then
make the connection again.

Detailed set up window

Network config
„
You can make detailed wired LAN settings.
1
Click [Detailed set up] → [Network config] in the
menu.
2
Confirm the notes that appear on the screen and
click [Next].
The settings window appears, showing the current settings.
•
To change the LAN settings, click [Change].
•
To return to the previous window, click [Back].
(cont.)
12
Advanced control window
„
On this window, click the [Advanced control] tab.