Table of Contents
Advertisement
Tint (Video mode only)
The tint adjusts the red-green color balance in the projected image.
Press the left key to increase the amount of green in the image.
Press the right key to increase the amount of red in the image.
Color (Video mode only)
The color setting adjusts a video image from black and white to fully saturated color.
Press the left key to decrease the amount of color in the image.
Press the right key to increase the amount of color in the image.
Image (Computer mode only)
Tracking
Choose " Tracking " item to synchronize the signal timing of the display with that of the graphic
card. When you experience an unstable or flickering image, use this function to correct it.
Frequency
"Frequency" is for changing the display data frequency to match the frequency of your
computer's graphic card. When you experience a vertical flickering bar, use this function to make
an adjustment.
Auto-Image
The projector automatically adjusts tracking, frequency and vertical and horizontal
position for most computers.
* The image options are available only for computer sources. The projector can set these options
automatically for video sources.
Audio
Volume
Press the left button to decrease the volume.
Press the right button to increase the volume.
Bass
The Bass setting controls the lower frequencies of your audio source.
Press the left button to decrease the bass.
Press the right button to increase the bass.
English
15
Advertisement
Table of Contents
