Chapter 3 Control Panel; Lamps And Switch; Ready (Paper) Lamp - Brother HL-730 User Manual

English: HL-YL User's Guide, Chapter 3
CHAPTER 3
CONTROL PANEL

LAMPS AND SWITCH

Ready (Paper) Lamp

This section refers to the following lamps and switch on the printer
control panel.
Fig. 3-1 Lamps and Switch on Control Panel
Note
When the power switch is off or the printer is in sleep mode, all lamps
including the Ready lamp are off.
The Ready lamp indicates the current status of the printer.
Lamp Printer status
The power switch is off or the printer is in sleep
Off
mode. If the printer is in sleep mode, it will wake
up automatically when it receives data or you press
the control panel switch.
The printer is warming up.
Blinking
Fast The printer is cooling down and stops printing
Blinking until the printers internal temperature lower.
The printer is ready to print.
On
This lamp also works as the Paper lamp with the Alarm lamp. They blink simultaneously to
indicate a paper error. See "Operator Calls" in Chapter 6.

CHAPTER 3 CONTROL PANEL

3–1