Ipv6; Enabling Ipv6 - Xerox 8860DN - Phaser Color Solid Ink Printer User Manual
User guide
Hide thumbs
Also See for 8860DN - Phaser Color Solid Ink Printer:
- Quick use manual (5 pages) ,
- Advanced features manual (83 pages) ,
- Letter of volatility (1 page)
Table of Contents
Advertisement
IPv6
This section includes:
Enabling IPv6
on page 2-14
Setting the Interface ID
Automatic Address Assignment
DHCPv6
on page 2-17
Manual Address Assignment
Address Precedence
Enabling IPv6
IPv6 can be enabled or disabled independently of IPv4.
Note:
If you disable both IPv4 and IPv6, you will lose your connection to the printer. For
information on restoring the default TCP/IP settings, see
on page 2-15.
To enable/disable IPv6, use one of the following options:
The printer's control panel
CentreWare IS
Using the Control Panel
To enable/disable IPv6 on the control panel:
1.
Select
Printer Setup
2.
Select
Connection Setup
3.
Select
Network Setup
4.
Select
TCP/IPv6 Setup
5.
Select
, and then press the OK button to switch between
IPv6
Using CentreWare IS
To enable/disable IPv6 using CentreWare IS:
1.
Launch your web browser.
2.
Enter your printer's IP address in the browser's Address field.
3.
Click Properties.
4.
Select the Protocols folder on the left navigation panel, and then click TCP/IP.
5.
Click the TCP/IP (v6) button.
6.
Select the TCP/IP v6 Enabled check box to enable TCP/IP v6.
7.
Click the Save Changes button at the bottom of the page.
on page 2-15
on page 2-16
on page 2-18
on page 2-19
, and then press the OK button.
, and then press the OK button.
, and then press the OK button.
, and then press the OK button.
Phaser® 8560/8860 Printer
2-14
Resetting the TCP/IP Configuration
and
.
On
Off
IPv6
Advertisement
Table of Contents
