Usb Install; Windows 98 - Oki B4200 Software Installation Manual

Guide: software installation b4200 (american english)
Hide thumbs Also See for B4200:
Table of Contents

Advertisement

USB Install: Windows
INSTALL THE DRIVERS AND STATUS
MONITOR
Before you start the install, be sure the USB cable is
connected to your printer and PC, and your printer is
powered off.
1. Check that the USB cable is plugged in.
2. Turn the printer on.
3. Windows Add New Hardware Wizard displays. Click Next.
4. Select Search for the best driver... Click Next.
5. Insert the CD into the CD-ROM drive.
6. Select CD-ROM drive, clear all other choices. Click Next.
7. The USB port driver is located. Click Next.
8. Click Finish.
9. The Add New Hardware Wizard appears. Click Cancel.
10.The Menu Installer loads and the License Agreement
appears. Select I Agree. Click Next.
To load the Menu Installer if your system's Autorun is set off,
click Start→Run→Browse . Browse to your CD-ROM drive
and double-click Install.exe, then click OK. When the
License Agreement appears, select I Agree. Click Next.
11.Click the Printer Software button.
12.Follow the on-screen instructions selecting the LPT1 port.
You can change your port to USB from Control Panel when
the installation is complete.
13.Click Finish. Restart the Computer.
Select the USB Port and Print a Test Page
1. Click Start →Settings→Printers. Right-click OKI
B4200(PCL).
2. Click Properties.
3. Select the Details Tab.
®
98
4. Scroll down and select USB001 in the Print to the following
5. To print a test page, click the General Tab, then click the
6. Click OK to exit the Properties screen.
Open the Status Monitor
Click Start → Programs → OKIB4200/OKIB4200 Status
Monitor. See "Using the Status Monitor" on page.10.
View the On-line User's Guide
In order to open the on-line User's Guide, you must have
Acrobat Reader installed.
1. With the CD in your CD-ROM drive, Click
2. The License Agreement appears. Click I Accept. Click Next.
3. The Menu Installer appears.
4. Click View User's Guide or Install User's Guide.
4
port list. Click Apply.
Print Test Page button.
Star→Run→Browse. Browse to your CD-ROM drive and
double-click Install.exe. Click OK.

Advertisement

Table of Contents
loading

Table of Contents