Registration Of Domain Name - Panasonic UF-6950 - Panafax - Multifunction Supplementary Manual

Registration of Domain Name

This sets the NetBIOS domain names, and DNS suffix to use for user authentication.
Press FUNCTION
Enter the access code (4-digit) setup for the machine, and then
press .
SET
Press , and select "AUTH DOMAIN".
Press .
SET
A prompt appears for you to set the NetBIOS domain names.
You can set up to 10 domain names. Press
number ("01" to "10").
Enter the NetBIOS domain name, and then press
characters)
Enter the DNS domain name, and then press
Note:
If your Windows network is configured with Windows NT Server 4.0
and Exchange Server 5.5, enter the Exchange Server Name (FQDN),
on the Step 7.
The next number entry field appears (return to step 5).
Enter the next domain name if required.
Press to return to standby.
STOP
Note:
1. The User Authentication function becomes enabled after you perform
"Access Code Setting", "Authentication Setting", and "Domain Name
Registration", the control panel display changes from the standby message
to the login prompt.
2. Make sure that the Host Name has been set properly. For details, refer
to the Operating Instructions for Internet Fax/Email and Network Scan
Functions.
16
SET .
or to select the entry
SET
SET
. (Up to 15
. (Up to 60 characters)
ENTER ACCESS CODE
ENTER ACCESS CODE
****
DATE & TIME
09-01-2005 12:00
AUTH DOMAIN
PRESS SET TO SELECT
ENTER DOMAIN NAME
01
ENTER DOMAIN NAME
01 PANA01
ENTER DNS DOMAIN
01 panasonic.com
ENTER DOMAIN NAME
02