Advanced Options - Lexmark 6500e Copy Manual

Collate
This option keeps the pages of a print job stacked in sequence when printing multiple copies of the document. The factory default
setting for Collate is on; the output pages of your copies will be ordered (1,2,3) (1,2,3) (1,2,3). If you want all the copies of each
page to remain together, turn Collate off, and your copies will be ordered (1,1,1) (2,2,2) (3,3,3).
Content
This option lets you set the original document type and source.
Choose content type from Text, Text/Photo, Photo, or Graphics.
• Text—Use when the content of the original document is mostly text or line art.
• Graphics—Use when the original document is mostly business-type graphics such as pie charts, bar charts, and animations.
•
Text/Photo—Use when the original document is a mixture of text, graphics, and photos.
•
Photo—Use when the original document is mostly a photo or an image.
Choose content source from Color Laser, Black/White Laser, Inkjet, Photo/Film, Magazine, Newspaper, Press, or Other.
•
Color Laser—Use when the original document was printed using a color laser printer.
•
Black/White Laser—Use when the original document was printed using a mono laser printer.
• Inkjet—Use when the original document was printed using an inkjet printer.
• Photo/Film—Use when the original document is a photo from film.
•
Magazine—Use when the original document is from a magazine.
•
Newspaper—Use when the original document is from a newspaper.
•
Press—Use when the original document was printed using a printing press.
• Other—Use when the original document was printed using an alternate or unknown printer.

Advanced Options

Touching the Advanced Options button opens a screen where you can change ADF Skew Fix, Advanced Duplex, Advanced Imaging,
Create Booklet, Cover Page Setup, Custom Job, Edge Erase, Header/Footer, Margin Shift, Overlay, Paper Saver, and Separator
Sheets settings.
•
ADF Skew Fix—Use to correct slight skew in the scanned image.
•
Advanced Duplex—Use to specify the document orientation, whether documents are one-sided or two-sided, and how
documents are bound.
Note: Some Advanced Duplex options are available only on select printer.
• Advanced Imaging—Use to change or adjust Auto Center, Background Removal, Color Balance, Color Dropout, Contrast,
Mirror Image, Negative Image, Scan Edge to Edge, Shadow Detail, Sharpness, and Temperature settings before you copy the
document.
• Create Booklet—Use to create a booklet. You can choose between 1-sided and 2-sided booklets.
Note: This option appears only when a print duplexer and printer hard disk are installed.
•
Cover Page Setup—Use to set copy cover page and booklet cover page.
• Custom Job—Use to combine multiple scanning jobs into a single job.
•
Edge Erase—Use to eliminate smudges or information around the edges of a document. You can choose to eliminate an equal
area around all four sides of the paper, or pick a particular edge. Edge Erase will erase whatever is within the area selected,
leaving nothing on that portion of the scan.
• Header/Footer—Use to turn on Date/Time, Page number, Bates number, or Custom text, and prints them in the specified
header or footer location.
Copy guide
Page 3 of 4