3. HARDWARE SETUP
2. Push down firmly but gently the processor into the URM until it snaps into place.
NOTE: The processor edge fingers must be kept parallel to the connector or else
misalignment will occur.
Secure the assembly in place by pushing the two locks outward so that the locks
show through the retention mechanism's lock holes.
Lock hole
3.6.5 Removing the Processor
Push the two locks inward to disengage the latch feature and firmly lift the assembly
out of the URM.
Push lock inward
CAUTION!
You may wear gloves to protect your hands from the sharp edges
when removing processors.
28
CPU fan cable to
fan connector
CPU fan cable to
fan connector
ASUS K7V-RM User's Manual
Locked Position
(push upward)