Table of Contents
Advertisement
Ensure that the socket lever is lifted up to a 90°-100° angle; otherwise, the APU will not fit
in completely.
3.
Position the APU above the socket such that the APU
corner with the gold triangle matches the socket corner
with a small triangle.
4.
Carefully insert the APU into the socket until it fits in place.
The APU fits only in one correct orientation.
DO NOT force the APU into the socket to
prevent bending the pins and damaging the
APU!
5.
When the APU is in place, push down the socket
lever to secure the APU. The lever clicks on the side
tab to indicate that it is locked.
6.
Install a APU heatsink and fan following the
instructions that comes with the heatsink package.
You can also refer to section 1.6.2 Installing
heatsink and fan for instructions.
7.
Connect the CPU fan cable to the CPU_FAN connector on the motherboard.
F1A55 R2.0 CPU fan connector
DO NOT forget to connect the CPU fan connector! Hardware monitoring errors can occur if
you fail to plug this connector.
1-10
F1A55 R2.0
CPU_FAN
Small triangle
Gold triangle
Chapter 1: Product introduction
Advertisement
Table of Contents
