Asus CUSL2 User Manual page 22

3. HARDWARE SETUP
6) CPU External Frequency Setting (DSW)
This option tells the clock generator what frequency to send to the CPU, DRAM,
AGP, and the PCI bus. This allows the selection of the CPU's External fre-
quency.
IMPORTANT:
1. In JumperFree mode, all dip switches must be set to OFF.
2. When JumperFree mode is enabled, use BIOS setup in place of these switches
(see CPU Speed in Advanced Menu in BIOS Setup).
NOTE: Only selected switches are illustrated. For a complete frequency listing,
see next page.
CUSL2
CUSL2 CPU External
Clock (BUS) Frequency
Selection
NOTE: If your processor does not have a locked Frequency Multiple, you must
use CPU Core:Bus Freq. Multiple in 4.4 Advanced Menu to set the Frequency
Multiple. If the Frequency Multiple is locked, setting the Frequency Multiple in
BIOS setup will have no effect.
22
DSW
CPU 66.8MHz
DRAM 100.2MHz
AGP 66.8MHz
®
140MHz
CPU
DRAM 105MHz
AGP 70MHz
ASUS CUSL2 User's Manual
100.3MHz 103.0MHz 133.70MHz
100.3MHz 103.0MHz 100.30MHz
66.8MHz 68.7MHz 66.85MHz
133.70MHz 140MHz
(JumperFree Mode)
133.70MHz 140MHz
66.85MHz 70MHz