Asus CUSL2 User Manual page 21

3. HARDWARE SETUP
5) Voltage I/O Setting (VIO)
This jumper allows you to select the voltage supplied to the DRAM, chipset,
AGP, and PCI. The default setting of 3.40V should be used unless processor
overclocking requires a higher voltage.
Setting VIO
3.30 V [1-2]
3.40 V [2-3] (default)
3.60 V [3-4]
®
CUSL2
CUSL2 VIO Setting
WARNING!
Using a higher voltage may help when overclocking but may result
in the shortening of your computer component's life. It is highly recommended
that you leave this setting on its default.
1 2
3.30 V
ASUS CUSL2 User's Manual
VIO
2 3 3 4
3.40 V 3.60 V
21