Player; Insert Batteries Into The Player; Inserting A Multimediacard (Optional); Using Headphones - RCA rd1060 - 64 MB Kazoo Digital Audio Player User Manual

RD1060 IB-EN 1/4/02 6:18 PM
Before You Begin
4. Insert batteries into the

player

A. To insert batteries, lift open the
battery compartment door.
EJECT
B. Insert 2 "AAA"(LR03) batteries with
polarities corresponding to indications
on the compartment. (Refer to "More
information" for battery precautions.)
- -
+
+
-
batteries to remove
C. Close the door to the battery
compartment
3
Page 10
Note: Refer to the power level indicator
on display for battery level.
Replace with new batteries when the
indicator is empty.
5. Inserting a
Push the battery
MultiMediaCard (Optional)
compartment door
up to open
The player has built-in flash memory. To
extend the playtime, you can use the
optional MultiMediaCard slot.
A. Insert a MultiMediaCard into the card
slot when the player is off as the
diagram shows:
B. To remove card, slide EJECT in the
direction of the arrow.
EJECT
Caution: Do not remove
MultiMedia Card during playback or
Pull the ribbon
when power is on. It may result in
underneath the
damages to the unit and the card.
them
Before You Begin

6. Using Headphones

7. Connecting the k@zoo
Player to your Computer
Insert phone jack into
PHONES on the side of player
1. Lift the rubber cover on the player and
for listening. PHONES
turn it away from the socket.
2. Insert the smaller end of the connection
cable into the socket tightly.
Note: Have a Blast- Just Not in Your
Eardrums. Make sure you turn down
the volume on the unit before you put
on headphones. Increase the volume
to the desired level
3. Insert the opposite end of the connect-
only after head-
ing cable to the USB socket on the back of
phones are in
the computer.
place.
Note: Refer to the Software
Instruction manual for procedures in
setting up USB drivers and
transferring files to the player.
2
1
3
4