Enabling Voip Connections - NETGEAR DM111PSP - ADSL2+ Ethernet Modem User Manual

Enabling VoIP Connections

You can use the NAT ALG (Network Address Translation/Application Level Gateway) settings to
allow simultaneous VoIP phone calls.
To specify the NAT ALG configuration:
1. In the Advanced section of the main menu, select NAT ALG to display the following screen:
Figure 4-6
2. Select the Enable SIP ALG check box to allow VoIP clients to make two or more
simultaneous VoIP phone calls through the modem router.
3. Click Apply to save the settings.
4. Reboot the modem router so that the new settings take effect.
Advanced Configuration
ADSL2+ Modem Router DM111PSPv2 User Manual
v1.0, December 2008
4-9