TRENDnet TU3-H2PIE Quick Installation Manual page 6

10. Insert the TU3-H2PIE card firmly into an
available PCIe slot.
11. Connect an available 4-pin Molex power cable
from the computer's power supply to the
TU3-H2PIE card.
12. Turn ON the computer and wait until the
Windows desktop appears.
Note: For Windows 7/Vista, drivers will install automatically. Please skip to step 18. For
Windows XP, continue on to step 13.
13. The Found New Hardware Wizard appears
Select No, not this time and then click Next.
14. Select Install this software automatically
(recommended) and then click Next.
4