INSTALLATION REQUIREMENTS
Clearance requirements
IMPORTANT
DO NOT INSTALL YOUR WASHER:
1 In an area exposed to dripping water or outside
weather conditions. The ambient temperature
should never be below 60° F (15.6° C) to
maximize detergent effectiveness.
2 In an area (garage or garage-type building)
where gasoline or other fl ammables (including
automobiles) are kept or stored.
3 On carpet. Floor MUST be solid with a maximum
slope of 1 inch (2.5 cm). To minimize vibration
or movement, reinforcement of the fl oor may be
necessary.
Washer Dimensions
power cord attachment
location on rear of unit
water supply
connection on
rear of washer
drain hose reten-
tion clamp on rear
of washer
2
1
Power supply cord length on gas unit approximately 60 inches (152.5 cm).
Loose drain hose length beyond clamp approximately 52 inches (132 cm).
2
6
1
37"
(94 cm)
12"
(30.5 cm)
27" (68.5 cm)
MINIMUM INSTALLATION CLEARANCES - Inches (cm)
SIDES
Alcove
0" (0 cm)
0" (0 cm)*
Closet
0" (0 cm)
0" (0 cm)*
0"
0"
(0 cm)
(0 cm)
60" (152.5 cm)
to clear open lid
43"
(109 cm)
REAR
TOP
FRONT
23" (58.5 cm)
23" (58.5 cm) 1" (2.5 cm)
1"
(2.5 cm)
23"
(58.5 cm)
29" (73.5 cm)
n/a
0"
(0 cm)