Am Gateway Event Types; Connection_Started; Connection_Finished - Cisco TELEPRESENCE CALL DETAIL RECORDS FILE FORMAT Reference Manual

AM gateway event types

Currently the AM gateway CDRs support the event types listed in the table below. They are listed in
the order that they occur in the CDR.
Event type
<connection_started>
<connection_finished>
<participant_disconnected>
The tables in the sections below show the parameters for each event type in the order in which they
appear in the CDR. There is an explanation for each parameter.

connection_started

A new connection is initiated on the AM gateway.
Section
<connection>
<call>

connection_finished

A connection is terminated on the AM gateway.
Section
<connection>
<call>
Call Detail Record File Format Reference Guide
Description
A new connection is initiated
A connection is terminated
A participant has or has been disconnected. Note that there will be two
participant disconnected events per call
Name
unique_id
source
destination
Name
unique_id
duration
duration_in_minutes
disconnect_reason
Description
Unique identifier for the connection
Name of the calling participant
Name of the called participant
Description
Unique identifier for the connection
Duration in minutes and seconds
Duration rounded up to nearest minute
Reason the participant was disconnected. One
of:
unspecified
unspecified error
participant ended call
gateway ended call
no answer
rejected
rejected immediately
busy
timeout
network error
protocol error
destination unreachable
authentication failed
service unavailable
capability negotiation error
Advanced Media Gateway
Page 24 of 26