Call_Rejected - Cisco TELEPRESENCE CALL DETAIL RECORDS FILE FORMAT Reference Manual

Section
<target>
<screening>

call_rejected

The far end did not accept the call either by not answering, being busy, or by not accepting the call
from the operator.
Section
<connection>
<target>
Call Detail Record File Format Reference Guide
Name
called_number
protocol
gateway
gatekeeper
registrar
screened
Name
unique_id
disconnect_reason
Description
The number, URI, or IP address of the endpoint being
called
The protocol used on the connection. Either SIP or
H.323
Gateway address. Only present if the protocol is H.323
Name of the gatekeepers used to make the call. Only
present if the protocol is H.323
Name of the registrar used to make the call. Only
present if the protocol is SIP
Either yes or no, depending on whether this outgoing
connection is made through the operator
Description
Unique identifier for the connection in the format
nnnnnnnn
A string explaining the reason why the participant was
disconnected. Currently one of:
unspecified
no answer
rejected
rejected immediately
busy
gatekeeper error
protocol error
destination unreachable
participant ended call
participant dropped
gatekeeper ended call
all participants dropped
destination out of order
incompatible destination
auto attendant idle
ip encryption required
unknown reason
IP gateways
Page 20 of 26