W6021 Operating Instructions; The Control Panel; Extra Rinses - Asko W6461 Use And Care Manual

User manual use & care guide 6021-6461 (use & care guide)
Hide thumbs Also See for W6461:
Table of Contents

Advertisement

W6021 OPERA
W6021 OPERATING INSTR
W6021 OPERA
W6021 OPERA
W6021 OPERA
WARNING!
To reduce the risk of electric shock or injury to persons, read the "Important Safety
Instructions" section on page 2 before operating this appliance.

THE CONTROL PANEL

Door Open Button
Press to open the glass door. (Please note
that the unit must be at the end of a program
to open the glass door.)
The door will open automatically once a
program is completed.
Power Indicator Light
Glows when the power is
turned on.
Power Button
Press to turn on power to
the machine.
Start/Stop Button
Press to start or stop/
interrupt a program.
POWER BUTTON
The Power button turns the power to the machine on
and off. When the power is on, the power indicator light
glows red. The power must be on before you can open
the door, set the programs or start the machine.
START/STOP BUTTON
Once you've selected the program and options, press
this button to start the washer.
To stop the washer during a program, press and hold
this button down until the unit stops (about 3 seconds).
DOOR OPEN BUTTON
The door will open automatically once a program is
completed. Pressing this button will open the glass
door as long as the power to the unit is on, the machine
is at the end of a program, and there is no water in the
machine.
NOTE:
For instructions on how to open the door
manually in case of power failure, see page 24.
PROGRAM CONTROL KNOB
Turn this knob to the desired program. The table on the
following page defines each program.
TEMPERATURE CONTROL KNOB
Turn this knob clockwise to the desired wash
temperature. Always refer to the garments' care labels
for recommended wash temeratures.
Please note that the wash temperature for the Hand/
Wool Wash and Delicate programs will not heat higher
than 105° F.
Page 10
TING INSTR
TING INSTRUCTIONS
TING INSTR
TING INSTR
UCTIONS
UCTIONS
UCTIONS
UCTIONS
Temperature Control
Turn clockwise to select the
wash temperature.
Start
No spin/
Extra
Power
Door
Stop
No drain
rinses

Extra Rinses

Button
Press to program
seven rinses.
800 rpm
Temperature ˚F
205
175
160
No Spin/No Drain
Press to omit the spin and
final drain cycles.
OPTION BUTTONS
Extra Rinses
Extra Rinses
Extra Rinses
Extra Rinses
Extra Rinses
Press this button to add two rinses. Press the button
again to turn this option off. (This option cannot be
cancelled after the main wash water has pumped out.)
This option is recommended for persons with sensitive
skin or allergies.
No Spin/No Drain
No Spin/No Drain
No Spin/No Drain
No Spin/No Drain
No Spin/No Drain
Press this button to omit the spin cycles in all programs
along with the final drain. If you select this option, the
unit will stop with water in the drum, so you will have to
run the Drain program . The door will open automatically
after the Drain program is completed.
800 RPM
Press this button to reduce the spin speed from 1200
rpm to 800 rpm. This option is for delicate fabrics that
should not be spun at high speeds. Note: This option
does not apply to the Rinse and Spin programs.)
CANCELLING A PROGRAM
To cancel a program after it has started, press and hold
the Start/Stop button until the unit stops. If there is water
in the unit, you will have to turn the Program Control
knob to Drain then press Start. The water will drain and
the unit will stop in 30 to 45 seconds. The door will open
automatically after the Drain program is completed.
Program Control
Turn to select a program. (Please
note that the dial does not move as
the program advances.)
Programs
Drain
85
Spin
105
Rinse
Delicate
120
Hand/Wool
140
800 RPM Spin Button
Press to reduce spin speed from
1200 rpm to 800 rpm.
Sani
Heavy
Normal
plus
Perma
press
Normal
Quick

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

W6021

Table of Contents