Sharp DM-1505 - B/W Laser Printer Service Manual page 57

B. Cassette detection SW
1) Remove the pawl.
2) Remove the cassette detection SW.
3) Remove the harness.
1
3
2
C. Paper feed solenoid
1) Remove the screw.
2) Remove the connector.
3) Remove the paper feed solenoid.
3
D. Transport roller
1) Remove two E-rings.
2) Remove the transport roller.
1
A
B
∗ Install so that the earth spring A is brought into contact over bearing
B.
2
1
4
3
2
E. Paper feed clutch
1) Remove the E-ring.
2) Remove the paper feed clutch.
3) Remove the parts.
3
∗ When installing, fit the cut surface A.
F. 2nd paper feed roller
1) Remove the E-ring and the parts.
2) Remove the 2nd paper feed roller.
1
2
C
D
∗ When installing, hang the 2nd connection arm on the 2nd connec-
tion arm SP B. Be sure to install so that the earth spring C is in con-
tact under the bearing D.
7 – 20
DM-1505
A
2
A
B
1
1