Table of Contents
Advertisement
Ventilation Tips
e
e
Keep the hood and front air inlet
free of
ice, snow or
any other obstruction such as leaves. The heater and
defroster will work better, reducing the chance
of
fogging your windows.
Keep the a i r path under the front seats clear of
objects. This helps air to circulate throughout
your vehicle.
When the engine idles for a long time, the exterior
temperatwe sensor may cause the system to blow
a i r
that is too cool. Once'the vehicle is moving 'again,
the system will
try
to maintain the set temperature
inside your vehicle.
Defogging and Defrosting.
Use the FRONT button to quickly remove fog, frost or
ice from the windshield in extremely humid or cold
conditions.
Select the FRONT button
to
defrost the windshield. By
choosing this button, the ait-flow will be directed at the
windshield. Adjust your comfort level by pressing the
TEMP up-or down arrow. The fan speed will be
controlled by the system, you can change the fan speed
by pressing the top of the FAN button to increase speed,
and the bottom of the button to decrease speed.
Rear Window Defogger
The lines you see on the
rear window warm the
glass. Press xhe button to
start warming your window.
After 10 minutes, the system will go off but. if you need
additional warning t i m e , push the button again. The
system will then operate for five,minutes before going
off by itself.
I
NOTICE:
Scraping the inside of your rear window could
cut and'damage the heater. Your warranty would
.not cover this damage. Don't put decals there,.
you might have to scrape them off.
Advertisement
Table of Contents
