Buick CENTURY 1997 Manual page 99

Hide thumbs Also See for CENTURY 1997:
Table of Contents

Advertisement

Make sure the shift lever is fully into PARK (P) range
before starting the engine. Your Buick has a
brake-transaxle shift interlock. You must fully apply
your regular brakes before you can shift from PARK (P)
when the ignition is in RUN. If you cannot shift out of
PARK (P), ease pressure on the shift lever by pushing it
all the way into PARK (P) while keeping the brake pedal
pushed down. See "Shifting Out of PARK (P)" in
the Index.
REVERSE (R): Use this gear to back up.
NOTICE:
_ _ _ _ _ ~
~~
~~
~
Shifting to REVERSE (R) while your vehicle is
moving forward could damage your transaxle.
Shift to REVERSE (R) only after your vehicle
is stopped.
To
rock your vehicle back and forth to get out of snow,
ice or sand without damaging your transaxle, see
"Stuck: In Sand, Mud, Ice or Snow" in the Index.
NEUTRAL (N): In this position, your engine
doesn't connect with the wheels. To restart when you're
already moving, use NEUTRAL (N) only. Also, use
NEUTRAL
(N)
when your vehicle is being towed.
Shifting out of PARK (P) or NEUTRAL (N) while
your engine is "racing" (running at high speed) is
dangerous. Unless your foot is firmly on the
brake pedal, your vehicle could move very
rapidly. You could lose control and hit people or
objects. Don't shift out of PARK (P) or
NEUTRAL (N) while your engine is racing.
NOTICE:
Damage to your transaxle caused by shifting out
of PARK (P) or NEUTRAL (N) with the engine
racing isn't covered by your warranty.
2-23

Advertisement

Table of Contents
loading

Table of Contents